SolaX · 23.2 kWh · 1-phase HV LFP battery set
SolaX Triple Power HV 23.2kWh battery set
This is a complete SolaX Triple Power HV tower: one V2 master module and three V2 slaves, giving 23.2kWh of LFP storage under a single part number. It suits installers speccing a new high-capacity SolaX system who want the whole battery stack ordered in one go.
Delivery in 3–5 working days (estimate). The dispatch clock starts at cleared payment.
Description
Ordering the master and its three slaves together removes the most common T58 procurement mistake: slaves on the van with no master to run them. The V2 modules come from the same generation, so the tower assembles as SolaX intends rather than mixing revisions from separate purchases. For the installer it means the whole storage side of a quote is settled with a single decision, and for the office it means one line to raise, receipt and reconcile. Stock is held in the UK and sold at the ex-VAT figure on the page.
Specification
| Brand | SolaX |
|---|---|
| Part number | HV-58-4-23.2-V2 |
| Capacity | 23.2 kWh |
| Phase | Single-phase |
| Condition | New |
| Category | Batteries · Li-ion Battery Pack |
| Delivery method | Pallet freight (UN3480 Class 9 dangerous goods) |
What it pairs with
Drive it with a SolaX hybrid from the same catalogue, such as the X1-HYBRID-G4-5.0-V2 or the 7.5kW X1-HYBRID-G4-7.5, or add it to an existing PV array with the X1-FIT-G4-5.0 RetroFit charger-inverter. Wire the stack with the T58 battery and communication cables listed alongside. Inverter pairing depends on model and firmware revision, so confirm against SolaX's current compatibility list before ordering.
This set is the battery stack only; the inverter, cabling and any parallel box are separate line items. It is listed for single-phase storage systems. For anything this page can't settle, ask the trade desk before ordering or consult a competent installer.
Often bought alongside
Last updated 2026-07-19